How to Add the WAC Home Mesh Gateway

Before adding any lighting products, you must first set up the WAC Home Mesh Gateway. The Gateway controls and communicates with all WAC Home Lighting devices.

Before You Begin:

• Ensure the Gateway is powered on.

• Confirm you have access to the homeowner’s Wi-Fi network.

Steps to Add the Gateway

1. Tap “+” in the app.

2. Select WAC Home.

3. Choose WAC Home Gateway.

4. Select your connection type: Ethernet or WiFi.

5. Connect to the homeowner’s Wi-Fi network.

6. Tap “Continue.”

7. Scan the QR code located on the Gateway.

8. When promoted, select "Continue" to connect the Gateway to the cloud. 

Trouble Scanning?

• Make sure Bluetooth is turned on.

• Or tap “I don’t have a QR code” and select the device from the list shown.

What’s Next?

Once setup is complete, you can begin discovering and adding your WAC Home lighting devices.