How do I factory reset the VENTRIX CPU?

Performing a factory reset is a process to restore ALL settings to their original out-of-the-box configuration. Follow these steps carefully:

1. Loosen the Cover Screws:

   • Locate and loosen the cover screws on the S2CPU-BC. These screws secure the cover of the CPU. Use the appropriate tools to safely loosen them.

2. Locate the RESET Button:

   • Once the cover is loosened, find the RESET button on the S2CPU-BC. This button is typically located on the interior or circuit board of the CPU.

3. Power On the CPU:

   • Ensure the CPU is powered on and operational before proceeding with the factory reset.

4. Press and Hold the RESET Button:

   • While the CPU is powered on, press and hold the RESET button for a continuous 10 seconds. This action initiates the factory reset process.

5. Release the RESET Button:

   • After holding the RESET button for 10 seconds, release it. This step is crucial to allow the system to register the reset command.

6. Wait for Processor Reboot:

   • Allow a minimum of 30 seconds for the processor to reboot. During this time, the CPU will undergo the factory reset process and restart with the original settings.

Note:

• A factory reset will erase all custom configurations and settings. Ensure you have a backup of any critical data or configurations before initiating the reset.

By following these instructions, you can successfully perform a factory reset on the S2CPU-BC. Ensure to take necessary precautions and consider consulting the device documentation for any specific guidelines related to the reset process.