How do I reset my fan's network settings?

NOTE: A network reset will only re-broadcast the default WAC Smart Fan Wi-Fi network. All your product names, rooms, events, and other settings will not be changed.

1. Press and hold the fan speed up and fan speed down buttons for 5 seconds.
2. The LED will light red, blink green and return to solid red, and the receiver will beep to indicate that Wi-Fi reset is successful.
3. After the Wi-Fi resets, the fan will broadcast its service set indicator (SSID).
4. If the above sequence doesn’t work, bring your fan to a complete stop and try the following:
5. Power cycle the fan by cutting power using the emergency On/Off switch or breaker panel.
6. After 10 seconds, enable power.
7. Try sequence above again.
8. To reconnect the fan to the WAC Smart Fan app, tap the + within the app and follow the pairing sequence.

NOTE: If you are updating your router the fan will still appear in the WAC Smart Fan app but will need to be re-paired.