1. Wiring WAC Colorscaping and Non-Smart Lighting Fixtures

When installing your lighting system, it's important to wire smart and non-smart fixtures separately for proper functionality:

• WAC Colorscaping (Smart) Fixtures:
  Wire all smart fixtures together on their own dedicated runs. These runs should connect back to the "Zone 1" terminals on the transformer.

• Non-Smart Fixtures:
  Wire all non-smart (standard) fixtures on separate runs from the smart fixtures. These runs should connect back to the "Zone 2" terminals on the transformer.

Note: There is no need to pre-label or identify smart fixtures during installation. All fixture discovery, naming, and configuration is handled later through the MyWAC App.